Pyronix Euro 46 V9

Panel Connection – Serial RS232

Manufacturer	Pyronix
Model	Euro
Version	46
Minimum DualCom Pro Firmware	DualCom Pro: V2.24 DualCom Pro 2: V2.0.1
Minimum Panel Firmware	V9.10ar or greater for V10, use Pyronix Euro guide
Cable required?	Lead Provided with DualCom Pro
Panel Profile	Pyronix-Euro-RS232
Panel Bus Connection	RS232
Technical Notes	See below.

Manufacturer	Panel	Connection	Cable/Plug On	Supplied Cables
Pyronix	Euro/Enforcer	RS232	6 Pin	Green – RTN Blue – RS232-R Red – RS232-T

Go to “Engineer Mode” > Programme ‘ARC/SMS’ or ‘SMS’ call
‘ARC/SMS is’ will be displayed. Select ‘Enabled’ [0] > Select ‘ARC Details’ > Select ‘Format’ [141],
‘WebWayOne’ will be displayed
Select ‘SIA Ack Char’ [006] >Select ‘SIA Nack Char’ [021] > ‘Valid Areas’ Engineer’s choice
‘Area Accounts’ Engineer’s choice > Select ‘ARC Account’ (Site ID/Account No.)
Select ‘Content’ [17-32] Engineer’s choice (25 and 28 enable restores, see full table in
troubleshooting below)
Select ‘Redials’ [03] > Select ‘Time out’ [30] > Exit “Engineer Mode” into “Day Mode”

Go to ‘Set up Downloading’ > Select “Download” by (WebWayOne) > Select “Poll Timeout”
<10>
Select “Modem Unit Timeout” <060> > Select “Rings To Answer” <1>
Select “Comm. Tx Timeout <030> > Select “ARMPC Telephone Number” (not required)
Select “Program PCs” <1> > Select “Signal Alarms” (No) > Select “Signal Faults” (No) > Select
“Signal Set/Unset” (No)
Select “Signal Access Code” (No) > Select “Password” (optional UDL password) > Select
“Redials” <03> > Select “Time Out” <00>
Enter 1111
Press YES until Program PC 1 and enter 1111 again